Protectapeel RustProtect
Protectapeel Anti Rust is a peelable coating designed to protect steel from damage caused by; flash rusting, weld spatter, salt water, corrosion, weathering, abrasion and scratching. This coating CANNOT be used on acrylic surfaces
| Use | External |
|---|---|
| Container Size | 15 KG, 25 KG, 200KG |
| Coverage Rate | 4m² per Kilo |
| VOC | 69.3 gl -1 |
| Durability | 12/24 Months |
| Colour | Red |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Capability Statement
Product Capabilities & Performance
Verder UK imports precision-engineered pump components from manufacturing facilities in Turkey
See how JGC Engineering used Protectapeel Anti Rust to protect offshore wind energy containers from saltwater, weathering and damage.
See how BAE Systems used Protectapeel Anti Rust to protect steel flight deck sections for the HMS Queen Elizabeth carrier project.
See how Cammell Laird used Protectapeel Anti Rust to protect steel surfaces on the RRS Sir David Attenborough build.
service related FAQ’s
The cost of Protectapeel depends on the size and type of product you purchase. While protective film and boards are often seen as cheaper surface protection options, we conducted a cost comparison to evaluate this assumption. Take a look at our cost comparison. For detailed results and more information, please contact us.
Protectapeel is applied using an airless spray gun. For optimal results, we recommend using the Graco 390. If needed, spray guns are also available for rent directly from us.
No, Protectapeel peels off cleanly without leaving any adhesive or residue on the surface.
Yes, Protectapeel can be applied to a range of non-porous surfaces, including flooring, sanitary basins, countertops, windows, frames, and doors. Before project handover, it can be easily removed by hand peeling, revealing clean, undamaged surfaces without delays or additional costs. Before application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
Protectapeel is designed to protect surfaces from costly damage during manufacturing, construction, storage, and transportation. It helps minimise delays caused by repairs or replacements and reduces cleaning costs.