Protectapeel Multi Surface
Protectapeel Multi Surface coating is a peelable protective coating designed to protect internal surfaces such as; glass, aluminium, acrylic, PVCu, painted aluminium and polished concrete
| Use | Internal |
|---|---|
| Container Size | 15 KILO, 200 KG, IBC |
| Coverage Rate | 4m² per Kilo |
| VOC | 3 gl -1 |
| Durability | 12/24 MONTHS |
| Colour | Grey/Pigmented |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Protectapeel Multi Surface Pro
Protectapeel Multi Surface Pro is a peelable protective coating designed to externally protect surfaces such as; glass, aluminium, acrylic, PVCu, painted aluminium and polished concrete
| Use | External |
|---|---|
| Container Size | 15 KILO, 200 KG, IBC |
| Coverage Rate | 3.3M² per Kilo |
| VOC | 0 gl -1 |
| Durability | 12/24 MONTHS |
| Colour | White |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Capability Statement
Product Capabilities & Performance
Protecting Sanitary Ware During Construction
Protectapeel Multi Surface coating is widely used to protect bath tubs, sinks, and sanitary basins from damage during construction and refurbishment projects. Applied before or after installation, it forms a durable peelable coating that shields surfaces from scratches, paint overspray, mortar, dust, and general site contamination.
The coating conforms closely to the surface, providing reliable protection without affecting the finish underneath. Once construction work is complete, Protectapeel is simply peeled away by hand, revealing a clean, damage-free surface. This helps prevent costly repairs or replacements while ensuring sanitary ware remains in pristine condition until handover.
Temporary Walkway Marking For Factory Floors
As a multi surface coating, Protectapeel can be used to create temporary walkway markings on factory and warehouse floors during maintenance, reorganisation, or special projects. The coating is applied directly to the floor and can be coloured to clearly define pedestrian routes, restricted areas, or work zones.
Unlike permanent paint, it can be removed without damaging the underlying surface or leaving residue behind. The durable coating withstands foot traffic while remaining easy to peel away when no longer required. This provides a flexible and cost-effective solution for temporary floor marking and site management.
Protecting Marine Components During Storage
Protectapeel is used to protect marine components during internal storage, helping to preserve high-value surfaces before installation or assembly. The peelable coating forms a durable barrier against scratches, dust, dirt, and handling damage commonly encountered in storage environments.
It adheres securely to a wide range of materials and remains in place without lifting or degrading over time. This ensures components stay clean and protected throughout the storage period. When required, the coating can be peeled away easily, revealing the original surface in pristine condition.
Protecting Kitchens During Installation
Protectapeel multi surface coating provides reliable protection for kitchen worktops, cupboards, and fitted units during installation and finishing works. The peelable coating guards surfaces against scratches, paint splashes, dust, and general site damage, helping to maintain a flawless finish.
Unlike traditional protective films, Protectapeel will not lift, curl, or lose adhesion over time, ensuring consistent protection throughout the project. It conforms closely to complex shapes and edges, creating a robust barrier that stays in place until work is complete. Once no longer needed, the coating simply peels away, leaving surfaces clean, undamaged, and ready for handover.
service related FAQ’s
Protectapeel is applied using an airless spray gun. For optimal results, we recommend using the Graco 390. If needed, spray guns are also available for rent directly from us.
Yes, Protectapeel can be applied to non-porous door and window frames to protect from damage caused by scratching, plaster, or weather exposure. Before full application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
The recommended application thickness for each Protectapeel product is detailed in the Technical Data Sheet. Applying the minimum thickness is essential for effective protection and easy removal.
The cost of Protectapeel depends on the size and type of product you purchase. While protective film and boards are often seen as cheaper surface protection options, we conducted a cost comparison to evaluate this assumption. Take a look at our cost comparison. For detailed results and more information, please contact us.
Yes, Protectapeel can be applied to a range of non-porous surfaces, including flooring, sanitary basins, countertops, windows, frames, and doors. Before project handover, it can be easily removed by hand peeling, revealing clean, undamaged surfaces without delays or additional costs. Before application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.