Protectapeel Passivhaus
Protectapeel Passivhaus sealant is used to seal gaps and cracks within the building envelope to prevent air leakage and improve thermal performance, particularly around windows, doors and critical junctions
| Use | Sealing |
|---|---|
| Container Size | 15 KG, 25 KG, 200KG |
| Coverage Rate | 4m² per Kilo |
| VOC | 53.22 gl |
| Durability | Long Term |
| Colour | Blue/Pigmented |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Capability Statement
Product Capabilities & Performance
Protect Performance. Preserve Efficiency
A passivhaus building minimises heat loss, relying on airtight, well-insulated, and undamaged building envelopes. Protectapeel Passivhaus sealant supports these standards by creating airtight layers during construction, helping preserve the integrity of energy-efficient buildings in both new builds and refurbishments.
Protectapeel seals gaps and cracks within the building envelope to prevent air leakage and improve thermal performance, particularly around windows, doors and critical junctions. Applied easily with an airless spray gun, it delivers precise, clean sealing and a smooth, professional finish across a wide range of substrates.
Once cured, Protectapeel forms a durable yet flexible seal that maintains airtightness despite building movement and temperature changes. By reducing air infiltration, it cuts energy loss, lowers heating and cooling costs, and supports long-term sustainability and compliance with energy-efficient building standards.
service related FAQ’s
Protectapeel is applied using an airless spray gun. For optimal results, we recommend using the Graco 390. If needed, spray guns are also available for rent directly from us.
Yes, Protectapeel can be applied to non-porous door and window frames to protect from damage caused by scratching, plaster, or weather exposure. Before full application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
Yes, applying Protectapeel Top Coat on top of Protectapeel Original creates a waterproof barrier that effectively protects surfaces from moisture and contaminants.
Protectapeel is applied using an airless spray gun, eliminating the need for measuring or cutting to size (if you used protective film or board). It is quickly applied taking just 49 seconds per m².
The cost of Protectapeel depends on the size and type of product you purchase. While protective film and boards are often seen as cheaper surface protection options, we conducted a cost comparison to evaluate this assumption. Take a look at our cost comparison. For detailed results and more information, please contact us.