Protectapeel Boothstrip
Protectapeel Boothstrip is a peelable spray booth protective coating that protects walls, floors, and work surfaces from overspray and contamination.
It withstands temperatures up to 80°C and provides a light-reflective surface to improve working conditions.
The coating can be overcoated multiple times before peeling, making maintenance quick and cost-effective.
| Use | Internal |
|---|---|
| Container Size | 15 KG, 25 KG, 200KG |
| Coverage Rate | 3.3m² per Kilo |
| VOC | 3 gl -1 |
| Durability | 12/24 Months |
| Colour | White/Pigmented |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Capability Statement
Product Capabilities & Performance
Reduce cleaning time by 50%
Every minute your spray booth sits idle for cleaning is a minute you’re not painting or generating revenue. In busy paint shops, overspray quickly builds up on walls, floors, lights, and fixtures, turning a simple clean into hours of scraping and heavy solvent use.
As overspray accumulates, skilled painters spend valuable time cleaning instead of spraying, deep cleans delay production, and chemical costs continue to rise. Protectapeel spray booth protective coating prevents these problems by creating a peelable barrier that captures overspray before it bonds to booth surfaces.
You can overspray Protectapeel multiple times. Once the coating reaches full coverage, simply peel it away by hand to remove the accumulated overspray and reveal the clean surface underneath.
By eliminating harsh solvents and chemicals, Protectapeel makes booth maintenance faster, safer, and far less labour-intensive. Reapply it with an airless spray gun, and your booth is ready for protection again.
The result? Cut cleaning time by up to 50%, maintain brighter and more reflective surfaces, improve spray visibility, and spend more time spraying instead of scraping.
Peel your way to faster, cleaner spray booths
Once the coating becomes heavily layered with overspray, Protectapeel can simply be peeled away by hand, removing the accumulated paint and revealing the clean surface underneath.
It simply condenses into a small ball and can be returned to our manufacturing facility for free recycling within the UK.
service related FAQ’s
Protectapeel is applied using an airless spray gun, eliminating the need for measuring or cutting to size (if you used protective film or board). It is quickly applied taking just 49 seconds per m².
Protectapeel can be applied to a variety of non-porous surfaces, including glass, windows, aluminium, stainless steel, and more, offering protection against scratches, paint, dust, and debris. Before application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
Simply peel it off from one edge. It comes off in one piece, leaving no residue or damage to the surface.
Yes, Protectapeel is UV-resistant and can be removed easily even after prolonged exposure to sunlight.
Protectapeel provides a peelable coating that protects glass from scratches, dirt, and damage during construction. It is easily applied using an airless spray gun, reducing labour requirements on-site. Once the project is complete, the coating can be effortlessly peeled away, leaving the glass clean and undamaged.