Marine Coatings

Protectapeel BoatShield

Protectapeel BoatShield is a temporary peelable coating used to protect boats and yachts during manufacture, transit and storage.

This waterproof coating protects surfaces such as; GRP, metals, glass, polished concrete, painted aluminium, stoved and cured paints. This coating CANNOT be used on acrylic surfaces

Use	External
Container Size	15 KILO, 200 KG, IBC
Coverage Rate	4m² per Kilo
VOC	53.22 gl
Durability	12/24 MONTHS
Colour	Blue/Pigmented

SDS

TDS

Glass	Aluminium	Mild Steel	Acrylic	PVCu	Painted Aluminium	Wood/Timber	Polished Concrete

Protectapeel TeakGuard

Protectapeel TeakGuard is a waterproof temporary peelable protective coating used to protect teak decking from abrasion, spillage and scratching for up to 24 months.

Use	External
Container Size	15 KILO, 200 KG, IBC
Coverage Rate	3.3M² per Kilo
VOC	0 gl -1
Durability	12/24 MONTHS
Colour	Brown

SDS

TDS

Glass	Aluminium	Mild Steel	Acrylic	PVCu	Painted Aluminium	Wood/Timber	Polished Concrete

Capability Statement

Product Capabilities & Performance

Liquid applied by airless spray gun for consistent coverage
Easy to remove by peeling, leaving the surface residue-free
Ideal for shaped and curved surfaces
Protectapeel Anti-Rust rated C5 High after 1,440 hours of salt spray testing, it meets EN ISO standards
Protection from; scratching, weld spatter, grinding sparks, rust, saltwater, UV, weathering and more
Up to 24 months of protection with no loss of adhesion, ensuring consistent performance over extended deployment or storage periods
Eliminates the need for surface preparation prior to painting, preserving substrate integrity and reducing process steps
Labour-efficient application and removal, minimising downtime and manpower requirements
Fully recyclable within the UK, supporting sustainability and waste-reduction objectives
ISO 9001 accredited
VOC Free Products

Marine Brochure

Protection During Manufacture & Build

During engineering and hot works, Protectapeel protects sensitive finishes from weld spatter, grinding sparks, and airborne contaminants, reducing the risk of permanent surface damage and costly repairs.

During construction, it prevents marking, scuffing, and contamination caused by foot traffic, tools, and materials.

Protection During Refit & Refurbishment

Refit and refurbishment projects place existing finishes under intense pressure. Confined working areas, multiple trades, and extended project timelines significantly increase the risk of surface damage.

Protectapeel provides a reliable, temporary protective solution designed to protect boats and yachts throughout maintenance, refit, and upgrade works.

service related FAQ’s

How thick should Protectapeel be applied?admin2026-04-08T11:59:19+00:00

How thick should Protectapeel be applied?

The recommended application thickness for each Protectapeel product is detailed in the Technical Data Sheet. Applying the minimum thickness is essential for effective protection and easy removal.

How is Protectapeel supplied?admin2026-04-08T12:19:09+00:00

How is Protectapeel supplied?

Protectapeel is primarily supplied in 15-kilo containers. For larger projects, IBCs are also available.

Can door and window frames be protected during construction?admin2026-04-08T12:23:50+00:00

Can door and window frames be protected during construction?

Yes, Protectapeel can be applied to non-porous door and window frames to protect from damage caused by scratching, plaster, or weather exposure. Before full application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.

Does Protectapeel leave any residue?admin2026-04-08T12:12:29+00:00