Protectapeel SignMask

Protectapeel Signmask is a peelable signage protective coating designed for the temporary masking, decoration, and protection of large structures and signs in internal environments. It protects surfaces such as plastics, acrylics, marble, work surfaces, stainless steel, concrete, lacquered flooring, tiles, and paintwork.
| Use | Internal |
|---|---|
| Container Size | 15 KILO, 200 KG, IBC |
| Coverage Rate | 3.3m² per Kilo |
| VOC | 3 gl -1 |
| Durability | 12/24 MONTHS |
| Colour | Grey/Pigmented |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Protectapeel SignPeel

Protectapeel Signpeel is a peelable coating designed for temporary masking of acrylics, plastics, painted surfaces and polystyrene during paint spraying and vacuum metalizing. One dry, Protectapeel Signpeel can be cut to create an air-tight painting template
| Use | Internal |
|---|---|
| Container Size | 15 KILO, 200 KG, IBC |
| Coverage Rate | 3.3M² per Kilo |
| VOC | 3 gl -1 |
| Durability | 12/24 MONTHS |
| Colour | Green |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Capability Statement
Product Capabilities & Performance
service related FAQ’s
Protectapeel is applied using an airless spray gun, eliminating the need for measuring or cutting to size (if you used protective film or board). It is quickly applied taking just 49 seconds per m².
Protectapeel is available for purchase directly from Spraylat International Ltd and through authorized distributors worldwide. For more information or assistance, please complete our contact form here.
The cost of Protectapeel depends on the size and type of product you purchase. While protective film and boards are often seen as cheaper surface protection options, we conducted a cost comparison to evaluate this assumption. Take a look at our cost comparison. For detailed results and more information, please contact us.
Protectapeel is applied using an airless spray gun. For optimal results, we recommend using the Graco 390. If needed, spray guns are also available for rent directly from us.
Yes, Protectapeel can be applied to non-porous door and window frames to protect from damage caused by scratching, plaster, or weather exposure. Before full application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.




