Protectapeel RustProtect
Protectapeel Anti Rust is a peelable coating designed to protect steel from damage caused by; flash rusting, weld spatter, salt water, corrosion, weathering, abrasion and scratching. This coating CANNOT be used on acrylic surfaces
| Use | External |
|---|---|
| Container Size | 15 KG, 25 KG, 200KG |
| Coverage Rate | 4m² per Kilo |
| VOC | 69.3 gl -1 |
| Durability | 12/24 Months |
| Colour | Red |
| Glass | Aluminium | Mild Steel | Acrylic | PVCu | Painted Aluminium | Wood/Timber | Polished Concrete |
|---|---|---|---|---|---|---|---|
Capability Statement
Product Capabilities & Performance
Verder UK imports precision-engineered pump components from manufacturing facilities in Turkey
See how JGC Engineering used Protectapeel Anti Rust to protect offshore wind energy containers from saltwater, weathering and damage.
See how BAE Systems used Protectapeel Anti Rust to protect steel flight deck sections for the HMS Queen Elizabeth carrier project.
See how Cammell Laird used Protectapeel Anti Rust to protect steel surfaces on the RRS Sir David Attenborough build.
service related FAQ’s
Protectapeel can be applied to a variety of non-porous surfaces, including glass, windows, aluminium, stainless steel, and more, offering protection against scratches, paint, dust, and debris. Before application, you must always apply the Protectapeel product to a small test area to test the substrate’s suitability. You must ensure that all substrates are well covered. Allow the product to dry for 48 hours, and then check that the Protectapeel product will peel away from each substrate.
The cost of Protectapeel depends on the size and type of product you purchase. While protective film and boards are often seen as cheaper surface protection options, we conducted a cost comparison to evaluate this assumption. Take a look at our cost comparison. For detailed results and more information, please contact us.
Protectapeel is applied using an airless spray gun, eliminating the need for measuring or cutting to size (if you used protective film or board). It is quickly applied taking just 49 seconds per m².
Yes, Protectapeel is UV-resistant and can be removed easily even after prolonged exposure to sunlight.
Protectapeel is applied using an airless spray gun. For optimal results, we recommend using the Graco 390. If needed, spray guns are also available for rent directly from us.