components of the Queen Elizabeth Carriers being transported across the sea

Rust can develop long before a steel component reaches its final destination. Whether awaiting assembly, sitting in a storage facility or travelling overseas, exposure to moisture and changing environmental conditions can quickly turn perfectly good steel into a costly problem.

For manufacturers, fabricators and engineering companies, corrosion isn’t simply an appearance issue. Rust can lead to additional cleaning, surface preparation, rejected components and delays to production schedules.

So, how can you prevent rust on steel during storage and transportation, particularly when components need to remain protected for several months?

Why Does Steel Rust During Storage and Transportation?

Rust forms when iron in steel reacts with oxygen and moisture. Although this process occurs naturally, certain conditions can accelerate corrosion, even when components are stored indoors.

Common causes include:

  • Moisture and humidity: Damp conditions can encourage oxidation on exposed steel.

  • Condensation: Temperature fluctuations can cause moisture to collect on metal surfaces.

  • Saltwater and coastal exposure: Salt-laden air can accelerate corrosion, particularly during sea freight.

  • Handling and abrasion: Scratches and surface damage can compromise existing protective finishes.

  • Extended storage: Longer exposure periods increase the risk of corrosion if suitable protection is not in place.

Even a relatively short journey can expose steel components to several different environments, making temporary corrosion protection an important consideration.

What Are the Best Ways to Prevent Rust on Steel?

There are several methods available to protect steel against corrosion. The most suitable option depends on the component, its intended use, storage duration and environmental conditions.

Keep Steel Clean and Dry

Removing moisture, dirt and contaminants before storage is an important first step. Where possible, components should be stored in dry, controlled environments with adequate ventilation.

However, maintaining these conditions isn’t always practical, particularly for large fabricated components or equipment awaiting shipment.

Use Protective Covers and Packaging

Plastic wrapping, tarpaulins and protective sheeting can provide a physical barrier against dirt and direct exposure.

However, poorly fitted or damaged covers may allow moisture to enter. Condensation can also develop beneath the material, potentially trapping moisture against the steel.

Apply Oils, Greases or Corrosion Inhibitors

Temporary rust-prevention oils, greases and corrosion inhibitors are commonly used to protect metal components.

Although effective in suitable applications, some products require cleaning or degreasing before the component can be assembled, painted or put into service.

Protectapeel Anti Rust: Temporary Corrosion Protection for Steel

For businesses requiring longer-term protection without a permanent finish, Protectapeel peelable coatings offer another solution.

Protectapeel Anti Rust is a liquid-applied, peelable protective coating developed to protect steel surfaces during manufacturing, storage and transportation.

Applied using an airless spray gun or roller, it dries to form a tough, flexible film that follows the contours of the component, including shaped and curved surfaces.

Once cured, the coating provides a temporary protective barrier against:

  • Flash rusting and corrosion

  • Moisture and saltwater exposure

  • Weathering and environmental contaminants

  • Scratching and abrasion

  • Incidental weld spatter and grinding sparks

Protectapeel Anti Rust provides protection for up to 24 months, depending on the application thickness, substrate and exposure conditions.

Unlike conventional oils and greases, the coating can be peeled away when protection is no longer required, leaving no residue and reducing the need for additional cleaning.

Tested Corrosion Protection for Demanding Environments

Not all temporary protective coatings are designed for prolonged exposure to challenging conditions.

Protectapeel Anti Rust has achieved C5 High corrosion protection performance following 1,440 hours of salt spray testing, in accordance with EN ISO 12944-6 and EN ISO 9227.

This makes it particularly relevant for industrial applications where steel components may encounter high humidity, salt-laden environments or extended storage periods.

Correct application and coating thickness remain essential to achieving the required protection.

Protecting Steel Components During International Transportation

temporary steel protection on sections of the HMS Queen ElizabethTransporting steel components between manufacturing facilities presents additional challenges.

Components may leave a controlled factory environment, travel by road or sea and remain in storage for months before final assembly.

Throughout this journey, changing temperatures, humidity and handling can increase the risk of corrosion.

Protectapeel Anti Rust helps protect steel surfaces across these different stages, without requiring a permanent protective finish.

 

 

corrosion protection on pump componentsVerder UK, a supplier of industrial pump solutions, needed to protect precision-engineered components manufactured in Turkey and transported to the UK for assembly.

The components faced changing environmental conditions during transportation, followed by extended warehouse storage.

By using Protectapeel Anti Rust, Verder UK was able to protect valuable components against corrosion for up to 24 months, helping reduce the risk of cleaning, rework and replacement.

Once required for assembly, the protective coating could be peeled away, revealing clean, protected surfaces.

Prevent Costly Corrosion with Protectapeel Anti Rust

Rust prevention should begin before corrosion becomes a problem.

Whether you’re protecting fabricated steel, industrial machinery or precision-engineered components, selecting suitable temporary protection can help maintain surface quality, minimise delays and reduce costly rework.

Protectapeel Anti Rust offers a practical solution for businesses requiring durable, removable corrosion protection throughout storage and transportation.

With up to 24 months of protection, tested C5 High performance and easy peelable removal, it helps keep valuable steel components protected until they’re needed.

Need to protect steel components from rust?

Contact Spraylat International to discuss your application, request technical advice or find out how Protectapeel Anti Rust can support your next project.

related posts